This model consists of a universal motor situated behind a terminal box. The motor is a two pole machine with a series field winding (located on the stator) and an armature winding (located on the rotor) connected to slip rings and brushes. The motor is rated at:

Horsepower : 1/3 HP

Speed : 5000 RPM

Voltage : 115 Volts

Current : 5.0 AMPS

Max Ambient Temp : 400 C

The motor may be operated using either a AC or a DC supply.

The terminal box consists of two “FIELD” terminals, two “Armature” terminals, and 4 switch terminals. Two of these are designated L1 and L2 and are positioned below the remaining two terminals labeled T1 and T2.

OPERATION:

1. Make sure the starter switch and main AC breaker are OFF.

2. Make the connections shown in figure 1. The single phase AC supply may be used or a D.C. supply set to 115V D.C.

3. “Turn ON” the main AC breaker, then the starter (toggle) switch.

Universal MotorUniversal Motor 

Universal Motor

Universal Motor

 

ACUM-100 UNIVERSAL MOTOR CONNECTIONS

ACUM-100 UNIVERSAL MOTOR CONNECTIONS